Flock Heat Transfer Vinyl
With its suede-like texture, Flock Heat Transfer Vinyl, is among the most popular vinyl options. Great for two-color layering, Flock is easy to cut and weed. Flock can be a practical alternative to embroidery, too, because it gives you that raised, textured feel. Flock is probably the best way to go for layering.
Feed material into the cutter so that the carrier is on bottom. Preheat and position. Preheat garment for 10 seconds, prior to application. Position weeded design on garment. Place cover sheet over graphic. Cut logo words or numbers in reverse.
Apply heat. Temperature: 320°F; 160°C
Time: 15-20 seconds
Pressure: medium #5 on Hotronix®
Weed away excess material leaving only desired graphic on the carrier. Allow work to cool completely before peeling.
Tip: A Heat Printing Pillow or Print Perfect Pad is recommended for even pressure when working around zippers, buttons, heavy seams or mesh reversible jerseys.
Cutting Notes: You should always test cut prior to any production run. For best results, do not cut graphics smaller than 1 inch.
Care Instructions: Machine wash using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not iron directly.
Multi-Color Designs: Apply background for 2 seconds, peel when cool, and place foreground, heat apply at 320˚ medium pressure for 12 seconds, peel when cool.
Storage: Store flat, in a cool, dry area, away from direct heat and sunlight.
Length: Comes in 15 inch rolls